Gemalto Prox DU (IDBridge CL3000) vertical


Gemalto Prox DU (IDBridge CL3000) vertical
Availability: Not available
Please contact us for availability and prices
Units
Per Unit
1+
$ 129.95
10+
$ 116.96
50+
$ 110.46
100+
Prices shown are per unit, excluding tax and shipping.
Please contact us for higher volumes.
The The IDBridge CL3000 (formerly the Prox-DU) from Gemalto is a dual interface USB smart card reader that is ideal for environments where both contact and contactless technologies are in use. The reader will read/write to both ISO 7816 contact cards and ISO 14443 A/B contactless cards as well as MIFARE and NFC cards and tags.

This version of the IDBridge CL3000 is housed in a slim and elegant case with a permanent stand for convenient desktop use. The reader has been designed to evolve by allowing rapid firmware upgrade.

The IDBridge CL3000 is PC/SC and CCID compliant and supports plug-and-play in both contact and contactless modes. It connects to PC environments and other systems using USB 2.0 full speed interface.

The IDBridge CL3000 is compatible with Read-a-Card, the contactless card ID reading application, useful for the integration of RFID technology into new or existing systems.

Limited supply.

Prox-DU and Prox-SU



Technical Speficifations
ModelProx-DUProx-SU
Main functionsRead/write contact and contactless cards on two separate channels
Secure download of the reader firmware in EEPROM memory
Command set to adjust radio frequency parameters
Dual power supply protection, command to switch the card interfaces
Self test after power-up
Read/write contact and contactless cards on two separate channels
Secure download of the reader firmware in EEPROM memory
Command set to adjust radio frequency parameters
Dual power supply protection, command to switch the card interfaces
Self test after power-up
Hardware architecture32-bit ARM RISC microcontroller operating at up to MHz
CC EAL4+, crypto co-processor(3DES, AES, SHA-1, ECC, Key generation, true RNG)
Physical and environmental protection, unique serial number
32kb ROM, 256kb EEPROM, 100kb RAM
32-bit ARM RISC microcontroller operating at up to MHz
CC EAL4+, crypto co-processor(3DES, AES, SHA-1, ECC, Key generation, true RNG)
Physical and environmental protection, unique serial number
32kb ROM, 256kb EEPROM, 100kb RAM
Visual indicatorsOne blue LED for the contactless interface
One yellow LED for the ID-1 contact interface
The LEDs indicate the card power-up, read/write operations and failures
One blue LED for the contactless int1erface
One yellow LED for the ID-000 contact interface (SAM)
The LEDs indicate the card power-up, read/write operations and failures
Host interfaceUSB full speed at 12 mbps
CCID protocol handled separately by each interface
USB full speed at 12 mbps
CCID protocol handled separately by each interface
Contact smartcard interfaceISO 7816 1-4, EMV 2000 4.1 and IAS 1.0
Protocols: T=0 and T=1
Card power supply: 5V, 3V and 1.8V (Class A, B and C)
Support to all ISO 7816 TA1 parameters, up to TA1=97h with a 4 MHz reader clock
Baud rate: 9.6 kbps to 500 kbps
Card movement and type detection
Short circuit and thermal protection
8 friction contacts, ISO 7816 location ID-1 card size
Embossed smart cards supported
Reliability: 100,000 insertion cycles
ISO 7816 1-4, EMV 2000 4.1 and IAS 1.0
Protocols: T=0 and T=1
Card power supply: 5V, 3V and 1.8V (Class A, B and C)
Support to all ISO 7816 TA1 parameters, up to TA1=16h with a 4 MHz reader clock
Baud rate: 9.6 kbps to 344 kbps
8 friction contacts, ISO 7816 location ID-000 card size
Contactless smartcard interfaceStandards: ISO 14443 1-4 Type A/B and NFC (smartcard emulation mode)
Protocols: T=CL and MIFARE
Operating frequency: 13.56 MHz
Built-in antenna, reading distance up to 4cm
Baud rate: 106 kbps to 848 kbps
All MIFARE cards supported: Classic 1K/4K,DESFire, Ultralight, SmartMX
Up to 80 MIFARE keys stored both in volatile and non volatile memory
Standards: ISO 14443 1-4 Type A/B and NFC (smartcard emulation mode)
Protocols: T=CL and MIFARE
Operating frequency: 13.56 MHz
Built-in antenna, reading distance up to 4cm
Baud rate: 106 kbps to 848 kbps
All MIFARE cards supported: Classic 1K/4K,DESFire, Ultralight, SmartMX
Up to 80 MIFARE keys stored both in volatile and non volatile memory
Operating SystemsWindows 2000, XP 32-64 bits, Vista 32/64 bits, 7 32/64 bits, CE 5.0 and 6.0
Kernel 2.6 and above
MAC OS 10.4 to 10.6 (on-going)
Windows 2000, XP 32-64 bits, Vista 32/64 bits, 7 32/64 bits, CE 5.0 and 6.0
Kernel 2.6 and above
MAC OS 10.4 to 10.6 (on-going)
DriversCompliant with PC/SC and CCID specifications
Plug-and-play
Compliant with native PC/SC drivers embedded into the last Service Packs of Windows 2000, XP, Vista and 7
Proprietary PC/SC drivers available for the other OS
WHQL certified, WLP 2.0
Compliant with PC/SC and CCID specifications
Plug-and-play
Compliant with native PC/SC drivers embedded into the last Service Packs of Windows 2000, XP, Vista and 7
Proprietary PC/SC drivers available for the other OS
WHQL certified, WLP 2.0
Environmental performancesOperating temperature: 0C - 50C
Storage temperature: -20C - 60C
Humidity: 0% to 95%
ECM: CE89/336/CEE/FCC Part 15 Class B, VCCI
Security: UL 1950, cUL CSA 950
RoHS and WEEE compliant
MTBF: 400,000 h at +20C (contactless>
Operating temperature: 0C - 50C
Storage temperature: -20C - 60C
Humidity: 0% to 95%
ECM: CE89/336/CEE/FCC Part 15 Class B, VCCI
Security: UL 1950, cUL CSA 950
RoHS and WEEE compliant
MTBF: 400,000 h at +20C (contactless>
Power supply and cablePower supply: USB high-power
USB cable length: 1.8m
Connector USB 2.0 type A
Power supply: USB high-power
USB cable length: 1.8m
Connector USB 2.0 type A
Physical characteristicsDimensions: 68mm x 125mm x 24mm
Weight: 150g
Dimensions: 68mm x 125mm x 24mm
Weight: 150g
Certifications and compliancesEMV 2000 4.1 (contact)
IAS 1.0 (contact)

Compliant with FIPS 201 - PIV and ICAO-MRTD specifications (contactless)
Compliant with FIPS 201 - PIV and ICAO-MRTD specifications (contactless)
Development toolsMicrosoft PC/SC environment associated drivers
Gemalto CILK CCID API source code (contact)
Gemalto SmartDiag and Gem_PCSC test tools
Firmware download tools: Windows software for local loading and .dll libraries for remote loading
Microsoft PC/SC environment associated drivers
Gemalto CILK CCID API source code (contact)
Gemalto SmartDiag and Gem_PCSC test tools
Firmware download tools: Windows software for local loading and .dll libraries for remote loading
Warranty24 months or 100,000 smartcard insertions (contact)24 months or 100,000 smartcard insertions (contact)


Manufacturer: Gemalto

Connection Method: USB

Search
Have a question?

Call us on:
1-888-262-9642

Call us